Operation Manual

Vehicle care 159
Version with subwoofer box:
Remove load compartment floor
cover, on right side remove
additionally the tool box to gain
access to the cover 3 62.
2. Unscrew the plastic securing nut
from the inside by hand.
3. Carefully withdraw the light
assembly from the recesses and
remove.
4. Turn bulb holder anticlockwise
and remove. Replace bulb by
withdrawing:
Turn signal light 1
Tail light 2
Tail light/Brake light 3
version with Light Emitting Diode
(LED)
Only turn signal light 1 can be
changed.
5. Insert and turn bulb holder
clockwise into the tail light
assembly. Make sure that the
wires remain in the cable ducts.