Operation Manual

Driving and operating 127
City mode remains active during
Autostop, but is only operational
when the engine is running. Stop-
start system 3 119.
Deactivation
Press button B, LED in the button
extinguishes and a message pops up
in the Driver Information Centre.
Each time the engine starts, City
mode is deactivated.
Overload
If the steering in City mode is heavily
loaded, e.g. for long parking
manoeuvres or extreme city traffic,
the system is deactivated for
overheat protection. Steering
operates in normal mode until City
mode activates automatically.
Fault
In the event of a fault in the system,
c illuminates and a message is
displayed in the Driver Information
Centre.
Vehicle messages 3 91.
System calibration
If control indicators c and a
illuminate simultaneously, a
calibration of the power steering
system is necessary. This can occur
e.g. when turning the steering wheel
for one rotation with ignition switched
off. In this case switch on ignition and
turn steering wheel once from lock to
lock.
If control indicators c and a will not
extinguish after calibration, seek the
assistance of a workshop.