Owner`s manual

Remote Control Setup Commands (shift-pause-x):

Note: Zone must be on and unmuted to change these (zone 1-90).

shift-pause-1 Zone-Initial-Volume-To-Current (L/R levels)

shift-pause-2 Zone-Mute-Volume-To-Current (left level)

shift-pause-3 Zone-Min-Volume-To-Current (left level)

shift-pause-4 Zone-Max-Volume-To-Current (left level)

shift-pause-5 Zone-Previous-Volume-Flag-Off (zone turns on with programmed Initial Volume – normal)

shift-pause-6 Zone-Previous-Volume-Flag-On (zone turns on at previous level, saved when zone last turned off)

shift-pause-7 Zone-Audio-Mode to Mono

shift-pause-8 Zone-Audio-Mode to Stereo (normal)

shift-pause-9 Zone-Restore-Factory-Settings (Initial-Vol, etc., this zone only)

Examples (first set RC-16 to desired zone, then select a source):

· to configure a zone's maximum volume level (power amp has gain adjust):

- turn power amplifier's gain down (to perhaps 30 %)

- adjust volume, using remote control, to maximum

- adjust power amplifier's gain to loudest acceptable volume level

· to configure a zone's maximum volume level (power amp has NO gain adjust):

- adjust volume, using remote control, to desired level

- press shift-pause-4 to store this volume as the Maximum-Level

· to configure a zone for a fixed initial (turn-on) volume level:

- press shift-pause-5 to turn Previous-Volume-Flag off

- adjust volume to desired level

- press shift-pause-1 to store this volume as the Initial-Level

· to configure a zone for using Previous-Volume as initial level:

- press shift-pause-6 to turn Previous-Volume-Flag on

· to configure a zone for a desired mute level:

- adjust volume to desired level

- press shift-pause-2 to store this volume as the Mute-Level

· to configure a zone for a desired minimum volume level:

- adjust volume to desired level

- press shift-pause-3 to store this volume as the Minimum-Level

· to restore a zone's programmable parameters to factory settings:

- press shift-pause-9, and reset a zone's initial/mute/min/max/tapers...

Lattis Matrix Switcher 14 Software Version 7.3.0.0