Surer Multiple Safe Management A Multiple Smart Keys can not pair with the same safe. lt is recommended to pair one Smart Key per safe. B Recommended setting when using the Smart Key is Progressive entry mode. € You can manage multiple safes through the Vaultek® Wi-Fi® smartphone app and Web Dashboard. CAUTION when managing multiple safes in On Demand entry mode there is a chance you can open all safes within range.
View Battery Status Press and hold '6' and '@ Delete Fingerprints Press and hold 3" then "PROGRAM" button then enter master code Toggle interior Light Press and hold '5" and 7’ Toggle LCD Brightness Press and hold '5 ‘and '8* View Temperature Humidity Press and hold '2' and '5' Toggle Fahrenheit/Celsius Press and hold 2" and '6* 17 Vaultek® To check the battery level press and hold keys ‘6’ and '8' together for 3 seconds. The screen will indicate the battery level. See pages 06 to 07 for more information.
Sd re ale EEL Your Vaultek® safe can be secured via the included mounting screws to a flat surface, such as a closet wall, using Vaultek® strongly encourages you to register your safe as soon as you receive it. Registration provides many the per-dritled holes on the backside of the safe or the floor using the per-drillad holes on the bottom.
FAQ More online at vaulteksafe.com under Support Battery Q: Can | keep the safe plugged in at all times? A: Leaving your safe plugged in continually will not harm the safe or battery. ©: What happens to the fingerprints that are stored In my Vaultek® safe when the battery dais? A: The safe retains all fingerprints in the even of battery failure. Once the power is restored by inserting the AC adapter cable, the unit will function as it did before the power loss.
Troubleshooting More online at vaulteksafe.com under Support if you experience any issues with your safe, try the following solutions. Smart Key is not working. A: After pairing you need to assign an entry mode. Refer to Step 3 on page 13. After Smart Key Is paired you need to assign to either On Demand or Progressive entry mode, otherwise Smart Key will disable after pairing. Fingerprint scanner works sometimes and not others. A: We have a few suggestions to help improve the success rate on page 09.
hae This device has been evaluated to meet general RF exposure requirement, and this device can be used in fixed exposure condition without restriction. This device shall be used with a minimum separation distance of 20 cm from the human body. FCC statements: This device complies with part 15 of the FCC rules.