Full Product Manual

LCD INDICATIONS AND SYMBOLS

1. Low Battery Indication

2. Measurement Icon

3. Current Reading

4. Switch Off “REF” function

5. Threshold Value Selection

6. Temperature Unit (°C/°F)

7. Reference Temperature

8. REF Icon

BUTTON FUNCTIONS

• SET button: Sets Reference Temperature, °C or °F unit and Emissivity

adjustment mode.

• Shift Left/Right Buttons: Sets Threshold values {0.5° C (1° F), 3° C (5° F)

, 5° C(10° F), OFF} and Emissivity (0.1 to 1.0).

BATTERY INSTALLATION/REPLACEMENT

To maintain reading accuracy, when the low

battery icon appears, replace thermometer’s battery.

1. Place ﬁngers behind the battery housing cover tabs

and gently pull open the cover.

2. Pull the plastic ribbon under the batteries to pull the

batteries out.

3. Insert two fresh AA Alkaline batteries (with correct

polarity as shown by the marking on the side of

battery housing) over the plastic ribbon inside the

housing. Close the cover.

• Always purchase the correct size and grade of battery

most suitable for the intended use. Always replace

both batteries and install with correct polarity inside

thermometer.

PLASTIC RIBBON

HOUSING COVER

BATTERY

POLARITY

MARKING

BATTERY

COVER TAB