Operation Manual

Table Of Contents

ECTACO

SpeechGuard

TLX User Manual

OTHER CAPABILITIES

Google Play

ECTACO

SpeechGuard

TLX allows you to browse and download music,

magazines, books, movies, television programs, and applications that were

published through Google. If you don't have a Google account, you can also

create one.

Using the 2-Way Radio

Installing the 2-Way Radio Antenna

The 2-Way Radio function is designed to operate with an antenna. You must

install the antenna before using the 2-Way Radio. Do not install the antenna if you

only need GSM or CDMA cellular networking. The device is equipped with a built-

in antenna for this purpose.

 Open the antenna cover.

 Screw the antenna on the connector.

Setting up Parameters

 Launch the 2 Way Radio application.

 Select the check box in the top row to enable country selection.

 Tap the Area button and select your country or region.

 Tap the CH button and select a channel.

 Tap the CTCSS button and select one of the available levels. For example,

select 0.

 Tap the SQ button and select a noise cancelation level. It is recommended

that you select 1.

 Tap the OK button to save settings.

Note: Make sure the device of your interlocutor has the same 2 Way Radio

settings. To communicate, all radios in your group must be set to the same

channel and CTCSS code.

 Tap the Power On button to turn the radio on.

You can also configure the 2-Way Radio manually. To do this, select the check

box in the second row and then enter the frequency value manually. Below is an

example of settings.

 Set TFV and RFV frequencies to 462.7 MHz or any other frequency allowed

for this purpose in the host country.