Operation Manual

Table Of Contents

ECTACO

SpeechGuard

TLX User Manual

 If necessary, change the source language by tapping . The source

language should be your native tongue.

 Select the desired topic and then tap the desired set name. The game will

begin.

 The word description and four answer choices will be displayed. Select the

correct one.

If you have made an error, the word will be replaced with "---". If you have

guessed the word, the card will be set apart. If you guess wrong or select the Skip

button, the card will remain in the set and will be displayed later. The number of

unlearned cards in a set is recorded for each game. This information is displayed

on the screen. For example, Words left: 10, means you have 10 cards to be

learned.

When you have finished a set, the Current set is finished! Start over? message

will be shown.

 Select Yes to reset the statistics and go to the first question in the current set.

 To activate the application menu, tap . The commands are described on

page 31.

Learning Settings

This application enables you to create new sets of user entries. The database

created can be used in the following applications: Pockets, Translation Test,

Spell-It-Right, and Linguistic FlashCards.

 Tap New Set. The Name window will appear.

 Tap to specify the translation direction.

 Specify the set name and then tap OK.

To add or edit entries, please follow the steps below.

 Select the desired set and then select the Add user word command.

 In the window that appears, enter your information in every field as desired.

You can add a picture to the word as described on page 31.

 To edit an entry, just tap it. To save changes, tap OK.

 To delete an entry, hold the stylus down on it. In the menu that appears, tap

Delete user word.