User manual
Table Of Contents
- Table of contents
- 1 General information
- 2 Safety instructions
- 3 Features
- 4 Installation
- 5 Starting up
- 6 Connections and controls
- 7 Operating
- 8 Technical specifications
- 9 Plug and connection assignment
- 10 Troubleshooting
- 11 Cleaning
- 12 Protecting the environment
3. Press [UP] or [DOWN] to select the desired parameter and conrm the selection with
[ENTER].
4. Press [MENU] to return to the parent menu level.
The settings made in ‘Manual Mode’ are retained when the device is switched o and
on if the ‘Manual Mode’ is not changed before switching o.
7.2.7 Display lighting
1. Press [UP] or [DOWN] until the display shows ‘Backlight’ and conrm the selection with
[ENTER].
2. Press [UP] or [DOWN] and select ‘ON’ (Display lighting permanently enabled) or ‘OFF’
(the display lighting is switched o after 10 seconds) and conrm the selection with
[ENTER].
3. Press [MENU] to return to the parent menu level.
Operating
38
VP-1 FC DMX Video RGB + WW Panel
LED spotlight