User manual
Table Of Contents
- Table of contents
- 1 General information
- 2 Safety instructions
- 3 Features
- 4 Installation
- 5 Starting up
- 6 Connections and controls
- 7 Operating
- 8 Technical specifications
- 9 Plug and connection assignment
- 10 Troubleshooting
- 11 Cleaning
- 12 Protecting the environment
7.2 Main menu
7.2.1 DMX address
This setting is only relevant if the device is controlled via a DMX controller.
1. Press [UP] or [DOWN] until the display shows ‘DMX Address’ and conrm the selection
with [ENTER].
2. Press [UP] or [DOWN] to select the desired DMX address between 1 ( ‘001’ ) and 512
( ‘512’ ) and conrm the selection with [ENTER].
Make sure that this number matches the conguration of your DMX controller. The fol‐
lowing table shows the respective highest possible DMX address for the various DMX
modes.
Mode Highest possible DMX address
4-channel mode 509
8-channel mode 505
3. Press [MENU] to return to the parent menu level.
Operating
30
VP-1 FC DMX Video RGB + WW Panel
LED spotlight