User manual

Press [UP] or [DOWN] until the display shows ‘Backlight’ and press [ENTER]. Use [UP] or [DOWN]

to select ‘ON’ to permanently activate the display lighting and press [ENTER]. Use [UP] or

[DOWN] to select ‘10S OFF’ to deactivate the display lighting and press [ENTER]. The display

turns dark after 10 seconds. Press [MENU] to return to the parent menu level.

Press [UP] or [DOWN] until the display shows ‘DMX Fail’ and press [ENTER]. Use [UP] or [DOWN]

to select ‘Hold’ if the last setting is to be retained if the DMX control unit fails, then press

[ENTER]. Use [UP] or [DOWN] to select ‘Black’ if the spotlight is to be blacked out if the DMX

control unit fails, then press [ENTER]. Press [MENU] to return to the parent menu level.

Display lighting

Behaviour on DMX control

failure

Operating

VP-1 DMX Video BiLight Panel

LED spotlight