User manual

Press [UP] or [DOWN] until the display shows ‘Static Mode’ and press [ENTER]. Use [UP] or
[DOWN] to select the desired parameter and press [ENTER]. Use [UP] or [DOWN] to select the
desired value and press [ENTER]. Press [MENU] to return to the parent menu level.
In order to use this operating mode, the controls [CW DIMMER] and [WW DIMMER] must be fully
open.
The following parameters are available:
Display Function Value range
Brightness Overall brightness 0…255
Strobe Stroboscope frequency from
o (0) to fast (30)
0…30
Warm White Intensity warm white 0…255
Cold White Intensity cold white 0…255
Colour temperature and light
behaviour
Operating
28
VP-1 DMX Video BiLight Panel
LED spotlight