User manual

7 Operating

7.1 Starting the device

Connect the device to the power supply to start operation. The display shows the menu over‐

view.

7.2 Main menu

This setting is only relevant if the device is controlled via a DMX controller.

Press [UP] or [DOWN] until the display shows ‘DMX Address’ and press [ENTER]. Use [UP] or

[DOWN] to select the desired DMX address between 1 ( ‘001’ ) and 512 ( ‘A512’ ) and press

[ENTER]. Press [MENU] to return to the parent menu level.

DMX address

Operating

VP-1 DMX Video BiLight Panel

LED spotlight