User manual

NOTICE!

Risk of re

Do not block areas of ventilation. Do not install the device near any direct heat source. Keep the device away from naked ames.

NOTICE!

Risk of re and overheating

The use with closed barn doors can cause re or overheating in the spotlight. The lifetime of the LEDs will be reduced when using

the device with closed barn doors. Otherwise, the integrated thermostat causes a thermically reasonable shutdown. Use the device

only with open barn doors.

NOTICE!

Operating conditions

This device has been designed for indoor use only. To prevent damage, never expose the device to any liquid or moisture. Avoid

direct sunlight, heavy dirt, and strong vibrations. Only operate the device within the ambient conditions specied in the chapter

‘Technical specications’ of this user manual. Avoid heavy temperature uctuations and do not switch the device on immediately

after it was exposed to temperature uctuations (for example after transport at low outside temperatures). Dust and dirt inside can

damage the unit. When operated in harmful ambient conditions (dust, smoke, nicotine, fog, etc.), the unit should be maintained by

qualied service personnel at regular intervals to prevent overheating and other malfunction.

Safety instructions

VP-1 DMX Video BiLight Panel

LED spotlight