User manual

7 Operating
7.1 Starting the device
Connect the device to the power supply to start operation. After a few seconds, the display
indicates that a reset is in progress. The device is then ready for use. The display shows the
operating mode that was selected when the unit was last powered o.
7.2 Main menu
Press [ENTER] to activate the main menu. Use the buttons [UP] and [DOWN] to select a sub‐
menu. When the display shows the desired submenu, press [ENTER] to open it. To close the
main menu, press [MODE].
All previously made settings are retained even when you disconnect the device from the
power grid. To restart with default values, use the ‘RESET’ function.
The following table shows the setting options.
Operating
28
Typhoon True Par Kid 7x10 IP65
LED outdoor PAR