User manual

1. Press [M]. Press one of the arrow buttons repeatedly until the display shows ‘DIMM’ and
conrm with the selection with [OK].
2. Use the arrow buttons to select the desired submenu ‘DM01’ … ‘DM10’ and conrm the
selection with [OK].
ð
Manual adjustment of the brightness of each individual lamp is activated.
3. Use the arrow buttons to select the desired submenu ‘DM01’ … ‘DM10’ and conrm the
selection with [OK].
This setting is only relevant if the device is not controlled via DMX.
4. Conrm the selection with [OK]. Use [M] to return to the parent menu.
5. To return to the parent menu without changes press [M] without prior conrmation.
Dimmer setting
Operating
36
Starstrip 10 Active DMX
blinder