User manual

1. Press [M].
2. Press one of the arrow buttons repeatedly until the display shows ‘MASL’ and conrm
with the selection with [OK].
3. Press one of the arrow buttons repeatedly until the display shows ‘MA’ and conrm with
the selection with [OK].
4. Use the arrow buttons to select the desired behaviour:
n ‘ON’ : Master / Slave mode is activated. The device works as a master device and con‐
trols connected devices of the same type that are congured as slaves.
n ‘OFF’ : Master / Slave mode is deactivated. The device is in Stand-Alone mode.
5. Conrm the selection with [OK]. Use [M] to return to the parent menu.
6. To return to the parent menu without changes press [M] without prior conrmation.
Master mode
Operating
Starstrip 10 Active DMX
31
blinder