User manual

1. Press [M].

2. Press one of the arrow buttons repeatedly until the display shows ‘DMX’ and conrm

with the selection with [OK].

3. Use the arrow buttons to select the submenu ‘MODE’ and conrm the selection with

[OK].

4. Select the desired DMX mode:

n ‘1CH’ (one channel)

n ‘2CH’ (two channels)

n ‘4CH’ (four channels)

n ‘5CH’ (ve channels)

n ‘10CH’ (ten channels)

5. Conrm the selection with [OK]. Use [M] to return to the parent menu.

6. To return to the parent menu without changes press [M] without prior conrmation.

DMX mode

Operating

Starstrip 10 Active DMX

blinder