User manual

1. Press [M].

2. Press one of the arrow buttons repeatedly until the display shows ‘DMX’ and conrm

with the selection with [OK].

3. Use the arrow buttons to select the submenu ‘ADDR.’ and conrm the selection with

[OK].

Now you can set the number of the rst DMX channel to be used by the device

(DMX address).

4. Use the arrow buttons to select a value between ‘1’ and ‘512’ and conrm with the

selection with [OK].

Use [M] to return to the parent menu.

To return to the parent menu without changes press [M] without prior conrmation.

Make sure that this number matches the conguration of your DMX controller. The following

table shows the highest possible DMX address for the various DMX modes.

DMX address

Operating

Starstrip 10 Active DMX

blinder