User manual
Table Of Contents
- Table of contents
- 1 General information
- 2 Safety instructions
- 3 Features
- 4 Installation
- 5 Starting up
- 6 Connections and controls
- 7 Operating
- 8 Technical specifications
- 9 Plug and connection assignments
- 10 Troubleshooting
- 11 Cleaning
- 12 Protecting the environment
7.2.1 DMX address
This setting is only relevant if the device is controlled via a DMX controller.
1. Press [ENTER] to activate the main menu.
2. Press [UP] or [DOWN] repeatedly until the display shows ‘DMX ADDRESS’ . Conrm the
selection with [ENTER].
3. Press [UP] or [DOWN] to select the desired DMX address between 1 ( ‘001’ ) and 512
( ‘512’ ) and conrm the selection with [ENTER].
Make sure that this number matches the conguration of your DMX controller. The fol‐
lowing table shows the respective highest possible DMX address for the various DMX
modes.
Mode Highest possible DMX address
6-channel mode 507
8-channel mode 505
11-channel mode 502
18-channel mode 495
Operating
28
Sidus X6 HEX
LED PAR