User manual
Table Of Contents
- Table of contents
- 1 General information
- 2 Safety instructions
- 3 Features
- 4 Installation
- 5 Starting up
- 6 Connections and controls
- 7 Operating
- 8 Technical specifications
- 9 Plug and connection assignments
- 10 Troubleshooting
- 11 Cleaning
- 12 Protecting the environment
7 Operating
7.1 Starting the device
Connect the device to the power supply to start operation. After a few seconds the unit is
ready for use.
7.2 Operating controls on the device
1. Press [ENTER] to activate the main menu.
2. Press [UP] or [DOWN] to change between the menu items.
3. To activate the displayed menu item, press [ENTER].
4. Press [UP] or [DOWN] to change the respectively indicated value.
5. To conrm the displayed value, press [ENTER].
6. Press [MENU] to return to the parent menu level.
If you do not press any button for about 30 seconds, the display will turn o. The set values are
retained even when the device is disconnected from the mains power supply.
Operating
Sidus X6 HEX
27
LED PAR