User manual
Table Of Contents
- Table of contents
- 1 General information
- 2 Safety instructions
- 3 Features
- 4 Installation
- 5 Starting up
- 6 Connections and controls
- 7 Operating
- 8 Technical specifications
- 9 Plug and connection assignments
- 10 Troubleshooting
- 11 Cleaning
- 12 Protecting the environment
3 [SLAVE] | toggles between master and slave mode
4 [AUTO 1], [AUTO 2] | activates automatic mode 1 or 2
[SPEED] | activates the setting mode for the programme speed, adjust the speed using [UP] and [DOWN]
5 [SOUND 1], [SOUND 2] | activates mode 1 or 2 of the sound control
6 [UP] | toggles between individual programmes, increases the set value
[DOWN] | toggles between individual programmes, decreases the set value
7 [STROBE] | activates the strobe eect, set the strobe frequency with [UP] and [DOWN]
8 [0 … 9] | numeric keys for direct entry of values
9 Buttons for colour selection
Use
n [P] for UV light,
n [W] for white light,
n [A] for amber light,
n [R], [G] or [B] for primary colours red, green and blue.
Connections and controls
26
Sidus X6 HEX
LED PAR