User manual
Table Of Contents
- Table of contents
- 1 General information
- 2 Safety instructions
- 3 Features
- 4 Installation
- 5 Starting up
- 6 Connections and controls
- 7 Operating
- 8 Technical specifications
- 9 Plug and connection assignments
- 10 Troubleshooting
- 11 Cleaning
- 12 Protecting the environment
7.3.4 Display lighting
1. Press [ENTER] to activate the main menu.
2. Press [UP] or [DOWN] repeatedly until the display shows ‘SET UP’ . Conrm the selection
with [ENTER].
3. Press [UP] or [DOWN] repeatedly until the display shows ‘Display’ . Conrm the selection
with [ENTER].
4. Use [UP] or [DOWN] to choose between ‘30S’ (display turns o after 30 seconds of inac‐
tivity) and ‘ON’ (display is permanently on).
5. Press [ENTER] to accept the selection.
7.3.5 Resetting the device to factory defaults
1. Press [ENTER] to activate the main menu.
2. Press [UP] or [DOWN] repeatedly until the display shows ‘SET UP’ . Conrm the selection
with [ENTER].
3. Press [UP] or [DOWN] repeatedly until the display shows ‘RESET’ . Conrm the selection
with [ENTER].
4. To reset the device to factory default settings, press consecutively [UP], [DOWN], [UP],
[DOWN].
ð
The device is being reset.
Operating
36
Sidus X2 TW
LED PAR