User manual
Table Of Contents
- Table of contents
- 1 General information
- 2 Safety instructions
- 3 Features
- 4 Installation
- 5 Starting up
- 6 Connections and controls
- 7 Operating
- 8 Technical specifications
- 9 Plug and connection assignments
- 10 Troubleshooting
- 11 Cleaning
- 12 Protecting the environment
7.3.2 Key lock
1. Press [ENTER] to activate the main menu.
2. Press [UP] or [DOWN] repeatedly until the display shows ‘SET UP’ . Conrm the selection
with [ENTER].
3. Press [UP] or [DOWN] repeatedly until the display shows ‘Key locks’ . Conrm the selec‐
tion with [ENTER].
4. Use [UP] or [DOWN] to select ‘OFF’ (keylock o) or ‘ON’ (keylock on).
5. Press [ENTER] to accept the selection.
6. To cancel the key lock, press consecutively [DOWN], [UP], [DOWN], [UP].
7.3.3 Enabling IR remote control (RC) receiver
1. Press [ENTER] to activate the main menu.
2. Press [UP] or [DOWN] repeatedly until the display shows ‘SET UP’ . Conrm the selection
with [ENTER].
3. Press [UP] or [DOWN] repeatedly until the display shows ‘REMOTE’ . Conrm the selection
with [ENTER].
4. Use [UP] or [DOWN] to select ‘OFF’ (remote control o) or ‘ON’ (remote control on).
5. Press [ENTER] to accept the selection.
Operating
Sidus X2 TW
35
LED PAR