User manual
Table Of Contents
- Table of contents
- 1 General information
- 2 Safety instructions
- 3 Features
- 4 Installation
- 5 Starting up
- 6 Connections and controls
- 7 Operating
- 8 Technical specifications
- 9 Plug and connection assignments
- 10 Troubleshooting
- 11 Cleaning
- 12 Protecting the environment
7.2.7 Sound control
1. Press [ENTER] to activate the main menu.
2. Press [UP] or [DOWN] repeatedly until the display shows ‘SOUND’ . Conrm the selection
with [ENTER].
3. Use [UP] or [DOWN] to select a value between ‘00’ and ‘10’ to set the sound control
mode. Conrm the selection with [ENTER].
4. Use [UP] or [DOWN] to select a value between ‘00’ and ‘31’ to adjust the sensitivity of
the built-in microphone. Conrm the selection with [ENTER].
Operating
32
Sidus X2 TW
LED PAR