User manual
Table Of Contents
- Table of contents
- 1 General information
- 2 Safety instructions
- 3 Features
- 4 Installation
- 5 Starting up
- 6 Connections and controls
- 7 Operating
- 8 Technical specifications
- 9 Plug and connection assignments
- 10 Troubleshooting
- 11 Cleaning
- 12 Protecting the environment
7.2.6 Auto programmes
In this operating mode you select one of the automatic programmes and congure the run‐
ning speed of the automatic programme.
1. Press [ENTER] to activate the main menu.
2. Press [UP] or [DOWN] repeatedly until the display shows ‘AUTO MODE’ . Conrm the
selection with [ENTER].
3. Auto programme
Press [UP] or [DOWN] repeatedly until the display shows ‘AUTO’ . Conrm the selection
with [ENTER].
4. Use [UP] or [DOWN] to select the desired automatic programme (display shows ‘01’ …
‘05’ ). Conrm the selection with [ENTER].
5. Press [MENU] to return to the parent menu level.
6. Running speed
Press [UP] or [DOWN] repeatedly until the display shows ‘SPEED’ . Conrm the selection
with [ENTER].
7. Press [UP] or [DOWN] to set the running speed (display shows ‘01’ … ‘31’ ) of the selected
automatic programme. Conrm the selection with [ENTER].
Operating
Sidus X2 TW
31
LED PAR