User manual
Table Of Contents
- Table of contents
- 1 General information
- 2 Safety instructions
- 3 Features
- 4 Installation
- 5 Starting up
- 6 Connections and controls
- 7 Operating
- 8 Technical specifications
- 9 Plug and connection assignments
- 10 Troubleshooting
- 11 Cleaning
- 12 Protecting the environment
7.2.4 Behaviour on DMX control failure
1. Press [ENTER] to activate the main menu.
2. Press [UP] or [DOWN] repeatedly until the display shows ‘DMX STATE’ . Conrm the selec‐
tion with [ENTER].
3. Use [UP] or [DOWN] to choose between ‘DMX HOLD’ and ‘BLACKOUT’ to make the set‐
ting to be used when the DMX controller fails.
4. Press [ENTER] to accept the selection.
Display Meaning
‘HOLD’ Last DMX value is being held.
‘BLACKOUT’ Spotlight turns o.
7.2.5 Slave mode
This setting is only relevant if the device is not controlled via DMX.
1. Press [ENTER] to activate the main menu.
2. Press [UP] or [DOWN] repeatedly until the display shows ‘SLAVE MODE’ . Conrm the
selection with [ENTER].
ð
The device is now working in slave mode, i.e. it will exactly copy the movement of
the controlling master device, correct wiring provided.
Operating
30
Sidus X2 TW
LED PAR