User manual
Table Of Contents
- Table of contents
- 1 General information
- 2 Safety instructions
- 3 Features
- 4 Installation
- 5 Starting up
- 6 Connections and controls
- 7 Operating
- 8 Technical specifications
- 9 Plug and connection assignments
- 10 Troubleshooting
- 11 Cleaning
- 12 Protecting the environment
7.2.2 DMX mode
This setting is only relevant if the device is controlled via a DMX controller.
1. Press [ENTER] to activate the main menu.
2. Press [UP] or [DOWN] repeatedly until the display shows ‘CHANNELS MODE’ . Conrm the
selection with [ENTER].
3. Press [UP] or [DOWN] to select the desired DMX mode (display shows ‘02CH’ , ‘04CH’ ,
‘07CH’ or ‘10CH’ ) and conrm the selection with [ENTER].
7.2.3 Dimmer curve
1. Press [ENTER] to activate the main menu.
2. Press [UP] or [DOWN] repeatedly until the display shows ‘DMX CURVE’ . Conrm the selec‐
tion with [ENTER].
3. Use [UP] or [DOWN] to select the desired dimmer curve (display shows ‘CURV 1’ , ‘CURV
2’ , ‘CURV 3’ or ‘CURV 4’ ) and conrm the selection with [ENTER].
Operating
Sidus X2 TW
29
LED PAR