User manual
Table Of Contents
- Table of contents
- 1 General information
- 2 Safety instructions
- 3 Features
- 4 Installation
- 5 Starting up
- 6 Connections and controls
- 7 Operating
- 8 Technical specifications
- 9 Plug and connection assignments
- 10 Troubleshooting
- 11 Cleaning
- 12 Protecting the environment
1
| turns the device on and o
2 [DMX] | enables the DMX mode
Press the button once for then setting the DMX address using [UP] and [DOWN].
Press the button twice for then setting the DMX channel using [UP] and [DOWN].
3 [SLAVE] | switches between master and slave mode
4 [AUTO 1], [AUTO 2] | activates automatic mode 1 or 2
[SPEED] | activates the setting mode for the programme speed, adjust the speed using [UP] and [DOWN]
5 [SOUND 1], [SOUND 2] | activates sound-control mode 1 or 2
6 [UP] | switches between programmes, increases the set value
[DOWN] | switches between programmes, decreases the set value
7 [STROBE] | activates the Strobe eect, set the strobe frequency with [UP] and [DOWN]
8 [2500K … 7000K] | buttons for direct colour temperature selection
Connections and controls
26
Sidus X2 TW
LED PAR