User manual
Table Of Contents
- Table of contents
- 1 General information
- 2 Safety instructions
- 3 Features
- 4 Installation
- 5 Starting up
- 6 Connections and controls
- 7 Operating
- 8 Technical specifications
- 9 Plug and connection assignments
- 10 Troubleshooting
- 11 Cleaning
- 12 Protecting the environment
3 Features
Special features of the device:
n Multifunctional LED spot
n High-quality optical unit ensures a homogeneous light image in terms of colour mixing
and light distribution
n 7 × CW / WW 2-in-1 LEDs, 15 W each
n Control via DMX (4 channel modes), buttons and display on the device and supplied IR
remote control
n Ten preprogrammed automatic shows
n Master / Slave mode
n Colour temperature selection
n Sound control via built-in microphone
n Universal detachable double bracket for hanging or standing installation
n Adjustment screw on the bottom of the housing for angling when used as an up-light
n Quiet operation with silent mode
n Compact and lightweight housing for mobile use
For technological reasons, the light output of LEDs decreases over their lifetime. This eect
increases with higher operating temperature. You can extend the service life of the illuminants
by providing adequate ventilation and operating the LEDs with the lowest possible brightness.
Features
Sidus X2 TW
15
LED PAR