User manual

This operating mode can only be activated when the unit is operating in stand alone mode or
as master in a master / slave combination. This setting is only relevant if the device is not con‐
trolled via DMX.
n Press [MENU] repeatedly until the display shows ‘Manual’ . Conrm with [ENTER].
Use [UP] and [DOWN] to select the desired colour ( ‘Red’ , ‘Green’ , ‘Blue’ or ‘White’ ) and
conrm with [ENTER].
n Use [UP] and [DOWN] to set the desired intensity of the selected colour in a range from
‘000’
… ‘255’ and conrm with [ENTER].
n Press [MENU] repeatedly until the display shows ‘Mode’ . Conrm with [ENTER].
Use [UP] or [DOWN] to select the menu item ‘Manual’ and conrm with [ENTER] to enable
the manual operation.
7.3 Operating time
In the ‘DevTime’
menu, you call up information about the actual runtime of the LEDs.
n Press [MENU] repeatedly until the display shows ‘DevTime’ . Conrm with [ENTER].
The display shows the total runtime of the LEDs.
Manual operation
Operating
22
Retro Blinder 80 LED
Blinder