User manual

DMX mode Highest possible start address

5-channel mode 508

8-channel mode 505

21-channel mode 492

This operating mode can only be activated when the unit is operating in stand alone mode or

as master in a master / slave combination. This setting is only relevant if the device is not con‐

trolled via DMX.

n Press [MENU] repeatedly until the display shows ‘Mode’ . Conrm with [ENTER].

Use [UP] or [DOWN] to select the menu item ‘Auto’ and conrm with [ENTER] to enable the

automatic mode.

n To enable the automatic mode only for the COB LED, press [MENU] repeatedly until the

display shows ‘B light’

. Conrm with [ENTER].

Use [UP] and [DOWN] to select the menu item ‘Auto’ and conrm with [ENTER].

To disable the automatic mode only for the COB LED, use [UP] and [DOWN] to select the

menu item ‘Keep’ and conrm with [ENTER].

n To adjust the run speed of the automatic mode, press [MENU] repeatedly until the display

shows ‘Speed’ . Conrm with [ENTER].

Use [UP] and [DOWN] to select the desired run speed ‘Slow’ or ‘Quick’ and conrm with

[ENTER].

‘Automatic mode’

Operating

Retro Blinder 80 LED

Blinder