Data Sheet
DocID: 358337_20.09.2021
Thomann GmbH • Hans-Thomann-Straße 1 • 96138 Burgebrach • Germany • www.thomann.de
Intended use
This device is intended to be used as a rotating mounting for decora-
tive lighting. Any other use or use under other operating conditions is
considered to be improper and may result in personal injury or prop-
erty damage. No liability will be assumed for damages resulting from
improper use.
Danger for Children
Ensure that plastic bags, packaging, etc. are properly disposed
of and are not in the reach of babies and young children. Chok-
ing hazard! Ensure that children do not detach any small parts
from the product. They could swallow the pieces and choke! Never let
children use electrical devices unattended.
Disposal of the packaging material
For the transport and protective packaging, environmentally
friendly materials have been chosen that can be supplied to
normal recycling. Ensure that plastic bags, packaging, etc. are
properly disposed of. Do not just dispose these materials with your nor-
mal household waste, but make sure that they are fed to a recovery.
Please follow the notes and markings on the packaging.
Disposal of your old device
This product is subject to the European Waste Electrical and
Electronic Equipment Directive (WEEE) in its currently valid
version. Do not dispose of your old device with your normal
household waste. Dispose of this product through an ap-
proved waste disposal rm or through your local waste facility. Comply
with the rules and regulations that apply in your country. If in doubt,
consult your local waste disposal facility.
Mirror Ball Motor 3kg
EN
Features
Mirror ball motor
Ideal for balls up to 3kg
1,5 round per minute
Length of power cable: approx. 85cm
Supply voltage: 230V~ 50Hz
Dimensions (Ø×H): 116×58mm
Weight: 0.36kg