User manual

7 Operating

7.1 Starting the device

Connect the device to the power supply to start operation. After a few seconds, the display

indicates that a reset is in progress. The device is then ready for use. The display shows the

operating mode that was selected when the unit was last powered o.

7.2 Main menu

Press [ENTER] to activate the main menu. Use the buttons [UP] and [DOWN] to select a sub‐

menu. When the display shows the desired submenu, press [ENTER] to open it. To close the

main menu, press [MODE].

All previously made settings are retained even when you disconnect the device from the

power grid. To restart with default values, use the ‘RESET’ function.

The following table shows the setting options.

Operating

LED Typhoon PAR Outdoor 12x10, LED Typhoon True PAR 12x10 Outdoor

LED outdoor PAR