User manual

Use ‘Curve’ to select one of 3 preset dimmer curves.
1. Use [MENU] and press [UP] or [DOWN] to select the submenu ‘Curve’ .
2. Conrm your selection with [ENTER].
3. Use [UP] or [DOWN] to select one of three preset dimmer curves ( ‘Curve 1, Curve 2, Curve
3’ ).
4. Conrm your selection with [ENTER].
ð
The selected dimmer curve is accepted.
Display Meaning
‘Curve 1’ Dimmer curve with a at course at the beginning and a
steep course at the end
‘Curve 2’ Dimmer curve with linear (proportional) course
‘Curve 3’ Dimmer curve with a steep course at the beginning and
a at course at the end
Dimmer
Operating
LED Theater Spot 250 3200K
31
LED spotlight