User manual LED Theater Spot 250 3200K LED spotlight
Thomann GmbH Hans-Thomann-Straße 1 96138 Burgebrach Germany Telephone: +49 (0) 9546 9223-0 Internet: www.thomann.de 24.03.
Table of contents Table of contents 1 General information................................................................................................................................. 1.1 Further information........................................................................................................................... 1.2 Notational conventions.................................................................................................................... 1.3 Symbols and signal words.....
Table of contents 4 LED Theater Spot 250 3200K LED spotlight 9 Plug and connection assignment.................................................................................................... 39 10 Troubleshooting...................................................................................................................................... 41 11 Cleaning............................................................................................................................................
LED Theater Spot 250 3200K LED spotlight 5
General information 1 General information This user manual contains important information on the safe operation of the device. Read and follow all safety notes and all instructions. Save this manual for future reference. Make sure that it is available to all persons using this device. If you sell the device to another user, be sure that they also receive this manual. Our products and user manuals are subject to a process of continuous development.
General information 1.1 Further information On our website (www.thomann.de) you will find lots of further information and details on the following points: Download This manual is also available as PDF file for you to download. Keyword search Use the search function in the electronic version to find the topics of interest for you quickly. Online guides Our online guides provide detailed information on technical basics and terms.
General information 1.2 Notational conventions This manual uses the following notational conventions: Letterings The letterings for connectors and controls are marked by square brackets and italics. Examples: [VOLUME] control, [Mono] button. Displays Texts and values displayed on the device are marked by quotation marks and italics. Examples: ‘24ch’ , ‘OFF’ .
General information Instructions The individual steps of an instruction are numbered consecutively. The result of a step is indented and highlighted by an arrow. Example: 1. Switch on the device. 2. Press [Auto]. ð Automatic operation is started. 3. Switch off the device. 1.3 Symbols and signal words In this section you will find an overview of the meaning of symbols and signal words that are used in this manual.
General information Signal word Meaning DANGER! This combination of symbol and signal word indicates an immediate dangerous situation that will result in death or serious injury if it is not avoided. WARNING! This combination of symbol and signal word indicates a pos‐ sible dangerous situation that can result in death or serious injury if it is not avoided.
General information Warning signs Type of danger Warning – suspended load. Warning – danger zone.
Safety instructions 2 Safety instructions Intended use This device is intended for use as an electronic lighting effect by means of LED technology. The device is designed for professional use only and is not suitable for use in households. Use the device only as described in this user manual. Any other use or use under other operating con‐ ditions is considered to be improper and may result in personal injury or property damage. No liability will be assumed for damages resulting from improper use.
Safety instructions Safety DANGER! Danger for children Ensure that plastic bags, packaging, etc. are disposed of properly and are not within reach of babies and young children. Choking hazard! Ensure that children do not detach any small parts (e.g. knobs or the like) from the unit. They could swallow the pieces and choke! Never let children unattended use electrical devices. DANGER! Electric shock caused by high voltages inside Within the device there are areas where high voltages may be present.
Safety instructions WARNING! Risk of epileptic shock Strobe lighting can trigger seizures in photosensitive epilepsy. Sensitive persons should avoid looking at strobe lights. WARNING! Risk of injury caused by falling objects Make sure that the installation complies with the standards and rules that apply in your country. Always secure the device with a secondary safety attachment, such as a safety cable or a safety chain. Secure the barn door with a safety cable on the spotlight after installation.
Safety instructions NOTICE! Operating conditions This device has been designed for indoor use only. To prevent damage, never expose the device to any liquid or moisture. Avoid direct sunlight, heavy dirt, and strong vibrations. Only operate the device within the ambient conditions specified in the chapter ‘Technical specifications’ of this user manual.
Safety instructions NOTICE! Possible damage due to installation of a wrong fuse The use of different types of fuses can cause serious damage to the unit. Fire hazard! Only fuses of the same type may be used. NOTICE! Possible staining The plasticiser contained in the rubber feet of this product may possibly react with the coating of your surface and after some time cause permanent dark stains. In case of doubt, do not put the rubber feet directly on the surface and use a suitable underlay if neces‐ sary, i.
Features 3 Features The LED theatre spotlight replaces conventional Fresnel lens spotlights with 1000 W power. Special features of the device: n n n n n n n n n n n 1 × COB LED, 250 W Fresnel lens Colour temperature: 3200 K Colour rendering index: > 95 Max.
Features For technological reasons, the light output of LEDs decreases over their lifetime. This effect increases with higher operating temperature. You can extend the service life of the illuminants by providing adequate ventilation and operating the LEDs with the lowest possible brightness.
Installation 4 Installation Unpack and check carefully there is no transportation damage before using the unit. Keep the equipment packaging. To fully protect the product against vibration, dust and moisture during transportation or storage use the original packaging or your own packaging material suitable for transport or storage, respectively. WARNING! Risk of injury caused by falling objects Make sure that the installation complies with the standards and rules that apply in your country.
Installation NOTICE! Risk of overheating The distance between light output and the illuminated surface must be more than 1.5 m (19.7in). Provide sufficient ventilation. The ambient temperature must always be below 40 °C (104 °F). NOTICE! Use of stands When mounting the device onto a stand, ensure that the stand is in a safe and stable position and that the weight of the device does not exceed the maximum permissible load capacity of the stand.
Installation NOTICE! Possible data transmission errors For error-free operation make use of dedicated DMX cables and do not use ordi‐ nary microphone cables. Never connect the DMX input or output to audio devices such as mixers or ampli‐ fiers. Mounting options You can install the unit in hanging or standing position. When in use, the device must always be attached to a solid surface or an approved truss. Use the openings of the bracket provided for mounting.
Installation Please note that this device must not be connected to a dimmer.
Starting up 5 Starting up Create all connections while the device is off. Use the shortest possible high-quality cables for all connections. Take care when running the cables to prevent tripping hazards.
Starting up Connections in DMX mode 24 LED Theater Spot 250 3200K LED spotlight Connect the DMX input of the device to the DMX output of a DMX controller or another DMX device. Connect the output of the first DMX device to the input of the second one, and so on to form a daisy chain. Always ensure that the output of the last DMX device in the daisy chain is terminated with a resistor (110 Ω, ¼ W).
Connections and controls 6 Connections and controls ö # LED Theater Spot 250 MZ 3200K .
Connections and controls 1 Bracket for hanging or installation 2 Locking screws for positioning the bracket 3 Display 4 [ZOOM IN] Narrows the beam angle 5 [ZOOM OUT] Broadens the beam angle 6 [DMX OUT] DMX output 5-pin 7 [DMX IN] DMX input 5-pin 8 [POWER OUT] Power Twist connector for the voltage supply of a further device 9 Fuse holder 26 LED Theater Spot 250 3200K LED spotlight
Connections and controls 10 [POWER IN] Power Twist connector for the power supply of the device 11 [DMX OUT] DMX output 3-pin 12 [DMX IN] DMX input 3-pin 13 [DIMMER] Rotary control to set the light intensity LED Theater Spot 250 3200K LED spotlight 27
Connections and controls / 14 Display 15 [MENU] Calls up the main menu or a submenu. 16 [UP] Increases the displayed value by one. MENU UP DOWN ENTER 17 [DOWN] Decreases the displayed value by one. 0 1 2 3 28 LED Theater Spot 250 3200K LED spotlight 18 [ENTER] Confirms a selected value.
Operating 7 Operating 7.1 Starting the device Connect the device to the power supply to start operation. The device is immediately opera‐ tional and operates in the last mode with the settings last selected. 7.2 Main menu Menu control 1. Use [MENU], to open the main menu or to return to the main menu. 2. Use [UP] or [DOWN] to select the desired parameter or value. 3. Confirm the desired parameter or value with [ENTER]. ð The selected submenu opens up or the selected value is being accepted.
Operating DMX address Use ‘Address’ to select the start address channel for the DMX address. 1. Use [MENU] and press [UP] or [DOWN] to select the submenu ‘ Address’ . 2. Confirm your selection with [ENTER]. 3. Use[UP] or [DOWN] to select the desired start address from 1 to 512. 4. Confirm your selection with [ENTER]. ð The selected start address is accepted. Make sure that this number matches the configuration of your DMX controller.
Operating Dimmer Use ‘Curve’ to select one of 3 preset dimmer curves. 1. Use [MENU] and press [UP] or [DOWN] to select the submenu ‘Curve’ . 2. Confirm your selection with [ENTER]. 3. Use [UP] or [DOWN] to select one of three preset dimmer curves ( ‘Curve 1, Curve 2, Curve 3’ ). 4. Confirm your selection with [ENTER]. ð The selected dimmer curve is accepted.
Operating Display Use ‘BK Light’ to adjust the idle mode of the display. 1. Use [MENU] and press [UP] or [DOWN] to select the submenu ‘BK Light’ . 2. Confirm your selection with [ENTER]. 3. Use [UP] or [DOWN] to select ‘Auto’ to turn off the display automatically. Use [UP] or [DOWN] to select ‘Keep’ to enable the display permanently. 4. Confirm your selection with [ENTER]. ð The selected setting is accepted.
Operating Reset Use ‘Reset’ to reset the values to factory defaults. 1. Use [MENU] and press [UP] or [DOWN] to select the submenu ‘Reset’ . 2. Confirm your selection with [ENTER]. 3. Use [UP] or [DOWN] to select ‘OK’ to reset the values to factory defaults. Use [UP] or [DOWN] to select ‘Cancel’ to leave the set values unchanged. 4. Confirm your selection with [ENTER]. ð The selected setting is accepted.
Operating 7.
Operating 7.
Technical specifications 8 Technical specifications LED Theater Spot 250 MZ 3200K DIMMER MENU DOWN ENTER UP DMX OUT DMX IN Light source properties Colour temperature 3200 K Colour rendering index > 95 CRI Ra Light output 12730 Lux (2 m, 15° beam angle) Optical properties Beam angle 15 ° … 52 ° Control DMX Number of DMX channels 3 Input connections Power supply Power Twist socket DMX control XLR chassis socket, 3-pin DMX OUT PUSH PUSH 5 POWER IN 1 × COB LED, 250 W ZOOM OUT ZO
Technical specifications XLR chassis socket, 5-pin Power consumption max. 250 W Supply voltage 100 - 240 V Fuse 5 mm × 20 mm, 2 A, 250 V, fast-acting Degree of protection IP20 Mounting options Hanging, standing Dimensions (W × H × D) 310 mm × 450 mm × 435 mm Weight 10.
Technical specifications Further information 38 LED Theater Spot 250 3200K LED spotlight Optic Fresnel LED type COB Fanless No
Plug and connection assignment 9 Plug and connection assignment Introduction This chapter will help you select the right cables and plugs to connect your valuable equip‐ ment so that a perfect light experience is guaranteed.
Plug and connection assignment DMX connections 40 LED Theater Spot 250 3200K LED spotlight A five-pin XLR socket serves as DMX output, a five-pin XLR plug serves as DMX input. The drawing below and the table show the pin assignment of a matching coupling.
Troubleshooting 10 Troubleshooting NOTICE! Possible data transmission errors For error-free operation make use of dedicated DMX cables and do not use ordi‐ nary microphone cables. Never connect the DMX input or output to audio devices such as mixers or ampli‐ fiers. In the following we list a few common problems that may occur during operation.
Troubleshooting Symptom Remedy The unit does not work, no light. Check the mains connection and the fuse. No response to the DMX con‐ troller. 1. Check the DMX ports and cables for proper connection. 2. Check the address settings and the DMX polarity. 3. Try using another DMX controller. 4. Check to see if the DMX cables run near or alongside to high voltage cables that may cause damage or interfer‐ ence to DMX interface circuits.
Cleaning 11 Cleaning Optical lenses Clean the optical lenses, that are accessible from the outside, regularly in order to optimize the light output. The frequency of cleaning depends on the operating environment: wet, smoky or particularly dirty surroundings can cause more accumulation of dirt on the optics of the device. n Clean with a soft cloth using our lamp and lens cleaner (item no. 280122). n Always dry the parts carefully.
Protecting the environment 12 Protecting the environment Disposal of the packaging mate‐ rial For the transport and protective packaging, environmentally friendly materials have been chosen that can be supplied to normal recycling. Ensure that plastic bags, packaging, etc. are properly disposed of. Do not just dispose of these materials with your normal household waste, but make sure that they are collected for recycling. Please follow the notes and markings on the packaging.
Notes LED Theater Spot 250 3200K LED spotlight 45
Notes 46 LED Theater Spot 250 3200K LED spotlight
Musikhaus Thomann · Hans-Thomann-Straße 1 · 96138 Burgebrach · Germany · www.thomann.
