User manual

Press [Menu]. Press [Up] or [Down] repeatedly until the display shows ‘Addr’ and conrm with
[Enter]. The display shows ‘AXXX’ . Now you can set the number of the rst DMX channel to be
used by the device (DMX address). Use [Up] or [Down] to select a value between 1 and 512.
Make sure that this number matches the conguration of your DMX controller. The following
table shows the highest possible DMX address for the various DMX modes.
Mode Highest possible DMX address
4-channel 509
6-channel 507
8-channel 505
Conrm the selection with [Enter]. With [Menu], you return to the parent menu.
To return to the parent menu without changes press [Menu] without prior conrmation.
Press [Menu]. Press [Up] or [Down] repeatedly until the display shows ‘rL--’ and conrm with
[Enter]. The display shows ‘rLXX’ . Use [Up] or [Down] to adjust the Dimmer function in a range
from ‘rL00’ … ‘rL15’ (o … maximum brightness).
Conrm the selection with [Enter]. With [Menu], you return to the parent menu.
To return to the parent menu without changes press [Menu] without prior conrmation.
DMX address
Dimmer red
Operating
22
LED Theater Spot 120 FC
LED Spotlight