User manual LED Theater Spot 120 FC LED Spotlight
Thomann GmbH Hans-Thomann-Straße 1 96138 Burgebrach Germany Telephone: +49 (0) 9546 9223-0 Internet: www.thomann.de 30.05.
Table of contents Table of contents 1 General information................................................................................................................................. 1.1 Further information........................................................................................................................... 1.2 Notational conventions.................................................................................................................... 1.3 Symbols and signal words.....
Table of contents 4 LED Theater Spot 120 FC LED Spotlight 10 Troubleshooting...................................................................................................................................... 34 11 Cleaning....................................................................................................................................................... 36 12 Protecting the environment...............................................................................................
General information 1 General information This user manual contains important information on the safe operation of the device. Read and follow all safety notes and all instructions. Save this manual for future reference. Make sure that it is available to all persons using this device. If you sell the device to another user, be sure that they also receive this manual. Our products and user manuals are subject to a process of continuous development.
General information 1.1 Further information On our website (www.thomann.de) you will find lots of further information and details on the following points: Download This manual is also available as PDF file for you to download. Keyword search Use the search function in the electronic version to find the topics of interest for you quickly. Online guides Our online guides provide detailed information on technical basics and terms.
General information Letterings The letterings for connectors and controls are marked by square brackets and italics. Examples: [VOLUME] control, [Mono] button. Displays Texts and values displayed on the device are marked by quotation marks and italics. Examples: ‘24ch’ , ‘OFF’ . 1.3 Symbols and signal words In this section you will find an overview of the meaning of symbols and signal words that are used in this manual.
General information Warning signs Type of danger Warning – high-voltage. Warning – dangerous optical radiation. Warning – suspended load. Warning – danger zone.
Safety instructions 2 Safety instructions Intended use This device is intended for use as an electronic lighting effect by means of LED technology. The device is designed for professional use only and is not suitable for use in households. Use the device only as described in this user manual. Any other use or use under other operating con‐ ditions is considered to be improper and may result in personal injury or property damage. No liability will be assumed for damages resulting from improper use.
Safety instructions DANGER! Electric shock caused by high voltages inside Within the device there are areas where high voltages may be present. Never remove any covers. There are no user-serviceable parts inside. Do not use the device if covers, protectors or optical components are missing or damaged. DANGER! Electric shock caused by short-circuit Always use proper ready-made insulated mains cabling (power cord) with a protective contact plug. Do not modify the mains cable or the plug.
Safety instructions NOTICE! Risk of fire and overheating The use with closed barn doors can cause fire or overheating in the spotlight. The lifetime of the LEDs will be reduced when using the device with closed barn doors. Otherwise, the integrated thermostat causes a thermically reasonable shutdown. Use the device only with open barn doors. NOTICE! Operating conditions This device has been designed for indoor use only. To prevent damage, never expose the device to any liquid or moisture.
Features 3 Features The LED theatre spotlight replaces conventional Fresnel lens spotlights with 500 W … 650 W power.
Installation 4 Installation Unpack and check carefully there is no transportation damage before using the unit. Keep the equipment packaging. To fully protect the product against vibration, dust and moisture during transportation or storage use the original packaging or your own packaging material suitable for transport or storage, respectively. WARNING! Risk of injury caused by falling objects Make sure that the installation complies with the standards and rules that apply in your country.
Installation NOTICE! Risk of overheating The distance between light output and the illuminated surface must be more than 1.5 m (19.7in). Provide sufficient ventilation. The ambient temperature must always be below 40 °C (104 °F). NOTICE! Use of stands When mounting the device onto a stand, ensure that the stand is in a safe and stable position and that the weight of the device does not exceed the maximum permissible load capacity of the stand.
Installation Mounting options You can install the unit in hanging or standing position. When in use, the device must always be attached to a solid surface or an approved truss. Use the openings of the bracket provided for mounting. Always work from a stable platform whenever installing, moving or servicing the unit. In doing so, the area underneath the unit must be cordoned off. The safety cable must be attached to the safety cable eyelet. Please note that this device must not be connected to a dimmer.
Starting up 5 Starting up Create all connections while the device is off. Use the shortest possible high-quality cables for all connections. Take care when running the cables to prevent tripping hazards. Connections in DMX mode 16 LED Theater Spot 120 FC LED Spotlight Connect the DMX input of the device to the DMX output of a DMX controller or another DMX device. Connect the output of the first DMX device to the input of the second one, and so on to form a daisy chain.
Starting up Connections in master/slave mode When you configure a group of devices in master/slave mode, the first unit will control the other units for an automatic, sound-activated, synchronized show. This function is ideal when you want to start a show immediately. Connect the DMX output of the master device to the DMX input of the first slave device. Then connect the DMX output of the first slave device to the DMX input of the second slave device and so on.
Connections and controls 6 Connections and controls ) ö # POWER IN ( ' Menu Up Down Ente r % Fuse DMX IN DMX OUT POWER OUT 18 LED Theater Spot 120 FC LED Spotlight & $
Connections and controls 1 Display with function buttons. The display flashes when a valid DMX signal is present. [Enter] Confirms a selected value. [Up], [Down] Increases / decreases the displayed value by one. [Menu] Calls up the main menu or a submenu. 2 Power-Twist connector for the power supply of the device. 3 Power-Twist connector for the voltage supply of a further device. 4 [DMX IN] DMX input 5 [DMX OUT] DMX output 6 Focus control. Adjusts the beam angle in a range from 15° to 45°.
Connections and controls * + , 9 Mounting bracket 10 Front side with barn door attachment. 11 Locking screw for the mounting bracket.
Operating 7 Operating 7.1 Starting the device Connect the device to the power supply to start operation. The device is immediately opera‐ tional and operates in the last mode with the settings last selected. 7.2 Main menu Menu control Press [Menu] to open the main menu. Use [Up] or [Down] to select the desired parameter or to change the respectively indicated value. When the display shows the desired parameter or value press [Enter] to enter the respective submenu or confirm a new value.
Operating DMX address Press [Menu]. Press [Up] or [Down] repeatedly until the display shows ‘Addr’ and confirm with [Enter]. The display shows ‘AXXX’ . Now you can set the number of the first DMX channel to be used by the device (DMX address). Use [Up] or [Down] to select a value between 1 and 512. Make sure that this number matches the configuration of your DMX controller. The following table shows the highest possible DMX address for the various DMX modes.
Operating Dimmer green Press [Menu]. Press [Up] or [Down] repeatedly until the display shows ‘gL--’ and confirm with [Enter]. The display shows ‘gLXX’ . Use [Up] or [Down] to adjust the Dimmer function in a range from ‘gL00’ … ‘gL15’ (off … maximum brightness). Confirm the selection with [Enter]. With [Menu], you return to the parent menu. To return to the parent menu without changes press [Menu] without prior confirmation. Dimmer blue Press [Menu].
Operating RGB Flash function Press [Menu]. Press [Up] or [Down] repeatedly until the display shows ‘FLAS’ and confirm with [Enter]. The display shows ‘FLXX’ . Use [Up] or [Down] to adjust the flash speed in a range from ‘FL00’ … ‘FL15’ (off … maximum brightness). Confirm the selection with [Enter]. With [Menu], you return to the parent menu. To return to the parent menu without changes press [Menu] without prior confirmation. 7-fold colour change Press [Menu].
Operating Colour temperature preset Press [Menu]. Press [Up] or [Down] repeatedly until the display shows ‘CT--’ and confirm with [Enter]. The display shows ‘CTXX’ . Use [Up] or [Down] to select the desired colour temperature preset ‘CT00’ … ‘CT15’ (2800 K … 12000 K). Confirm the selection with [Enter]. With [Menu], you return to the parent menu. To return to the parent menu without changes press [Menu] without prior confirmation. Fade in / out speed Press [Menu].
Operating DMX mode Press [Menu]. Press [Up] or [Down] repeatedly until the display shows ‘CH--’ and confirm with [Enter]. Use [Up] or [Down] to select the desired DMX mode ‘CH04’ (4-channel mode), ‘CH06’ (6-channel mode) or ‘CH08’ (8-channel mode). Confirm the selection with [Enter]. With [Menu], you return to the parent menu. To return to the parent menu without changes press [Menu] without prior confirmation.
Operating 7.4 Functions in 4-channel DMX mode Channel Value Function 1 0 … 255 Dimmer red (0 % to 100 %) 2 0 … 255 Dimmer green (0 % to 100 %) 3 0 … 255 Dimmer blue (0 % to 100 %) 4 0 … 255 Dimmer white (0 % to 100 %) 7.
Operating Channel Value Function 5 0 … 255 Dimmer white (0 % to 100 %) 6 0 … 255 Stroboscope effect (0 % to 100 %) 7.
Operating Channel Value Function 60 … 74 Purple 75 … 89 Bluish violet 90 … 104 Reddish violet 105 … 119 Peach blossom 120 … 134 Pink 135 … 149 Red 150 … 164 Orange 165 … 179 Yellow 180 … 194 Lime 195 … 209 Light green 210 … 224 Green 225 … 239 Bluish green 240 … 254 Turquoise 7 0 … 255 Strobe effect from slow to fast (grey levels are adjusted by channel 1 to 6) 8 6 … 240 Gradual speed change from slow to fast LED Theater Spot 120 FC LED Spotlight 29
Operating Channel 30 Value Function 241 … 254 Automatic colour changes 255 Off LED Theater Spot 120 FC LED Spotlight
Technical specifications 8 Technical specifications 185 mm Light source 1 × COB LED, 120 W Light source properties Colour temperature 2800 K … 12000 K Colour rendering index 95 Beam angle 15 ° … 45 °, manually adjust‐ able on the device Refresh rate LED 10 kHz 260 mm Optical properties Control DMX, buttons and display on the unit Number of DMX channels 4, 6 or 8 Input connections Voltage supply lockable input socket (Power Twist) DMX control XLR chassis plug, 3-pin Power supply for
Technical specifications Further information 32 LED Theater Spot 120 FC LED Spotlight Fuse 5 mm × 20 mm, 3 A, 250 V, fast-acting Protection class IP20 Mounting options hanging, standing Dimensions (W × H × D) 185 mm × 160 mm × 260 mm Weight 5 kg Ambient conditions Temperature range 0 °C…40 °C relative humidity 20 %…80 % (non-condensing) Optic Fresnel Power of the individual LED 120 W Fanless no
Plug and connection assignments 9 Plug and connection assignments Introduction This chapter will help you select the right cables and plugs to connect your valuable equip‐ ment so that a perfect light experience is guaranteed.
Troubleshooting 10 Troubleshooting NOTICE! Possible data transmission errors For error-free operation make use of dedicated DMX cables and do not use ordi‐ nary microphone cables. Never connect the DMX input or output to audio devices such as mixers or ampli‐ fiers. In the following we list a few common problems that may occur during operation.
Troubleshooting Symptom Remedy The unit does not work, no light. Check the mains connection and the fuse. No response to the DMX con‐ troller. 1. Check the DMX ports and cables for proper connection. 2. Check the address settings and the DMX polarity. 3. Try using another DMX controller. 4. Check to see if the DMX cables run near or alongside to high voltage cables that may cause damage or interfer‐ ence to DMX interface circuits.
Cleaning 11 Cleaning Optical lenses Clean the optical lenses, that are accessible from the outside, regularly in order to optimize the light output. The frequency of cleaning depends on the operating environment: wet, smoky or particularly dirty surroundings can cause more accumulation of dirt on the optics of the device. n Clean with a soft cloth using our lamp and lens cleaner (item no. 280122). n Always dry the parts carefully.
Protecting the environment 12 Protecting the environment Disposal of the packaging mate‐ rial For the transport and protective packaging, environmentally friendly materials have been chosen that can be supplied to normal recycling. Ensure that plastic bags, packaging, etc. are properly disposed of. Do not just dispose of these materials with your normal household waste, but make sure that they are collected for recycling. Please follow the notes and markings on the packaging.
Notes 38 LED Theater Spot 120 FC LED Spotlight
Musikhaus Thomann · Hans-Thomann-Straße 1 · 96138 Burgebrach · Germany · www.thomann.
