User manual

Press [Menu]. Press [Up] or [Down] repeatedly until the display shows ‘CH’ and conrm with

[Enter]. Now you can set the number of the rst DMX channel to be used by the device (DMX

address). Use [Up] or [Down] to select one of two DMX modes ‘CH01’ (1-channel mode) or

‘CH02’ (2-channel mode).

Conrm the selection with [Enter]. With [Menu] to return to the parent menu.

To return to the parent menu without changes press [Menu] without prior conrmation.

Instead of using a DMX controller, connect the device to a master device using a suitable DMX

cable. The device follows exactly the operation of the Master to which it is connected.

DMX mode

Operating mode Slave

Operating

LED Theater Spot 100 3000K

LED Spotlight