User manual

Press [Menu]. Press [Up] or [Down] repeatedly until the display shows ‘Addr’ and conrm with
[Enter]. Now you can set the number of the rst DMX channel to be used by the device (DMX
address). Use [Up] or [Down] to select a value between 1 and 512 (for the 1-channel mode) or
511 (for the 2-channel mode).
Conrm the selection with [Enter]. With [Menu] to return to the parent menu.
To return to the parent menu without changes press [Menu] without prior conrmation.
Make sure that this number matches the conguration of your DMX controller.
Press [Menu]. Press [Up] or [Down] repeatedly until the display shows ‘Stat’ and conrm with
[Enter]. Use [Up] or [Down] adjust the Dimmer function in a range from ‘U000’ … ‘U255’
(o … maximum brightness).
Conrm the selection with [Enter]. With [Menu] to return to the parent menu.
To return to the parent menu without changes press [Menu] without prior conrmation.
Press [Menu]. Press [Up] or [Down] repeatedly until the display shows ‘tEmP’ and conrm with
[Enter]. The display shows the current internal temperature of the device in ‘XX’ format
(numeric value).
With [Menu] to return to the parent menu.
DMX address
Dimmer
Temperature
Operating
LED Theater Spot 100 3000K
23
LED Spotlight