User manual

This setting is only relevant if the device is not controlled via DMX.

1. Press [MENU] to open the main menu.

2. Press [UP] or [DOWN] repeatedly until the display shows ‘SLAV’ and conrm with

[ENTER].

3. Press [UP] or [DOWN] repeatedly until the display shows ‘YES’ and conrm with [ENTER]

The device is in Slave mode. With correct cabling, it behaves exactly like the control‐

ling master device.

4. Press [UP] or [DOWN] repeatedly until the display shows ‘NO’ and conrm with [ENTER]

The device is in Stand-Alone mode again.

5. To return to the previous menu level without changes, press [MENU].

Master / slave mode

Operating

LED Studio 150 2900K LED Studio 150 6000K

LED Spotlight