User manual

Use the ‘ADDR’ menu to set the DMX address. This setting is only relevant if the device is con‐

trolled via a DMX controller.

1. Press [MENU] to open the main menu.

2. Press [UP] or [DOWN] repeatedly until the display shows ‘ADDR’ and conrm with

[ENTER].

3. Press [UP] or [DOWN] to select a value between 1 and 512 for the DMX address (display

shows ‘001’ … ‘512’ ) and conrm with [ENTER].

Make sure that this number matches the conguration of your DMX controller. The fol‐

lowing table shows the respective highest possible DMX address for the various DMX

modes:

Mode Highest possible DMX address

1-channel mode 512

2-channel mode 511

4-channel mode 509

4. To return to the previous menu level without changes, press [MENU].

Setting the DMX address

Operating

LED Studio 150 2900K LED Studio 150 6000K

LED Spotlight