User manual

In this mode, you can manually set a constant colour pattern for all LEDs. This setting is only
relevant if the device is not controlled via DMX.
Press [MENU] repeatedly until the display shows ‘Colo’ .
Use [UP] or [DOWN] to select the submenu ‘r.xxx’ . Conrm with [ENTER] and use [UP] or
[DOWN] to adjust the intensity of the colour red for all LEDs in a range from ‘r.000’ … ‘r.255’ .
Conrm with [ENTER]. The display shows ‘S.xxx’ . Use [UP] or [DOWN] to set the strobe speed in
a range from ‘S.001’ (slow) to ‘S.099’ (fast). Conrm again with [ENTER] to apply the setting.
Use [UP] or [DOWN] to select the submenu ‘G.xxx’ . Conrm with [ENTER] and use [UP] or
[DOWN] to adjust the intensity of the colour green for all LEDs in a range from
‘G.000’ … ‘G.255’ . Conrm with [ENTER]. The display shows ‘S.xxx’ . Use [UP] or [DOWN] to set
the strobe speed in a range from ‘S.001’ (slow) to ‘S.099’ (fast). Conrm again with [ENTER] to
apply the setting.
Use [UP] or [DOWN] to select the submenu ‘b.xxx’ . Conrm with [ENTER] and use [UP] or
[DOWN] to adjust the intensity of the colour blue for all LEDs in a range from ‘b.000’ … ‘b.255’ .
Conrm with [ENTER]. The display shows ‘S.xxx’ . Use [UP] or [DOWN] to set the strobe speed in
a range from ‘S.001’ (slow) to ‘S.099’ (fast). Conrm again with [ENTER] to apply the setting.
Constant colour pattern
Operating
32
LED Pad Bar Compact ST RGB
LED lighting set