User manual

In automatic mode, you have the option to activate one of 17 coloured LED shows, one of ten
available stroboscope LED shows and one of three show programmes. This setting is only rele‐
vant if the device is not controlled via DMX.
Press [MENU] repeatedly until the display shows ‘Aut’ :
Use [UP] or [DOWN] to select the submenu ‘AutP’ . Conrm with [ENTER] and use [UP] or
[DOWN] to select one of 17 LED shows ‘AP01’ … ‘AP17’ . Conrm with [ENTER]. The display
shows ‘Sxx’ . Use [UP] or [DOWN] to set the programme speed in a range from ‘S01’ (slow) to
‘S99’ (fast). Conrm again with [ENTER] to apply the setting.
or
Use [UP] or [DOWN] to select the submenu ‘AutF’ . Conrm with [ENTER] and use [UP] or
[DOWN] to select one of ten stroboscope shows ‘AF01’ … ‘AF10’ . Conrm with [ENTER]. The
display shows ‘Sxx’ . Use [UP] or [DOWN] to set the programme speed in a range from ‘S01’
(slow) to ‘S99’ (fast). Conrm again with [ENTER] to apply the setting.
or
Use [UP] or [DOWN] to select the submenu ‘AutM’ . Conrm with [ENTER] and use [UP] or
[DOWN] to select one of three preprogrammed shows ‘AM01’ … ‘AM03’ . Conrm with
[ENTER]. The display shows ‘Sxx’ . Use [UP] or [DOWN] to set the programme speed in a range
from ‘S01’ (slow) to ‘S99’ (fast). Conrm again with [ENTER] to apply the setting.
Operating mode ‘Automatic’
Operating
30
LED Pad Bar Compact ST RGB
LED lighting set