User manual

Press [MENU]. Press [UP] / [DOWN] repeatedly until the display shows ‘StAt’ . Press [ENTER].

Press [UP] / [DOWN] repeatedly until the display shows ‘rEd’ (for red), ‘GrEE’ (for green), ‘bLUE’

(for blue), ‘ÛhIE’ (for white) or ‘AnbE’ (for amber). When the display shows the desired value

press [ENTER] to conrm the selection. Then use [UP] / [DOWN] to select a value for the dimmer

setting between 000 and 255 (display shows ‘r000’ … ‘r255’ , ‘g000’ … ‘g255’ , ‘b000’ … ‘b255’ ,

‘U000’ … ‘U255’ or ‘A000’ … ‘A255’ ). When the display shows the desired value press [ENTER] to

conrm the selection. Then use [UP] / [DOWN] to select a value for the strobe frequency

between 00 and 99 (display shows ‘St00’ … ‘St99’ ). When the display shows the desired value

press [ENTER] to conrm the selection and then [MENU] to return to the parent menu. To return

to the parent menu without making changes, press [MENU].

Press [MENU]. Press [UP] / [DOWN] repeatedly until the display shows ‘SoUn’ . Press [ENTER].

With [UP] / [DOWN] you can now select one of the two sound modes ‘SoU1’ or ‘SoU2’ . Press

[ENTER]. Use [UP] / [DOWN] to select a value for the microphone sensitivity between 0 and 9

(display shows ‘SEn0’ … ‘SEn9’ ). When the display shows the desired value press [ENTER] to

conrm the selection and then [MENU] to return to the parent menu. To return to the parent

menu without making changes, press [MENU].

Dimmer setting

Sound control

Operating

LED Pad 7 7x10W 5in1 RGBWA

LED PAR