User manual

Press [MENU]. Press [UP] / [DOWN] repeatedly until the display shows ‘AddR’ . Press [ENTER].

Now you can set the number of the rst DMX channel to be used by the device (DMX address).

Use [UP] / [DOWN] to select a value between 1 and 512 (the display shows ‘A001’ … ‘A512’ ).

When the display shows the desired value press [ENTER] to conrm the selection and then

[MENU] to return to the parent menu. To return to the parent menu without making changes,

press [MENU].

Make sure that this number matches the conguration of your DMX controller. The following

table shows the highest possible DMX address for the various DMX modes.

Mode Highest possible DMX address

1-channel 512

5-channel 508

6-channel 507

9-channel 504

DMX address

Operating

LED Pad 7 7x10W 5in1 RGBWA

LED PAR