User manual
Table Of Contents
- Table of contents
- 1 General information
- 2 Safety instructions
- 3 Features
- 4 Installation
- 5 Starting up
- 6 Connections and controls
- 7 Operating
- 7.1 Starting the device
- 7.2 System settings
- 7.3 Stand-alone mode
- 7.4 DMX operation
- 7.5 Menu overview
- 7.6 Functions in 2-channel DMX mode
- 7.7 Functions in 3-channel DMX mode
- 7.8 Functions in 4-channel DMX mode
- 7.9 Functions in 7-channel DMX mode
- 7.10 Functions in 9-channel DMX mode
- 7.11 Functions in 14-channel DMX mode
- 8 Technical specifications
- 9 Plug and connection assignments
- 10 Troubleshooting
- 11 Cleaning
- 12 Protecting the environment
7.4 DMX operation
Press [MENU] and then [UP] or [DOWN] until the display shows the menu item ‘DMX Address’ .
Now you can set the number of the rst DMX channel to be used by the device (DMX address).
Use [UP] or [DOWN] to select a value between 1 and 512 (the display shows ‘001’ … ‘512’ ). Con‐
rm the desired selection with [ENTER].
Make sure that this number matches the conguration of your DMX controller. The following
table shows the highest possible DMX address for the various DMX modes.
Mode Highest possible DMX address
2-channel 511
3-channel 510
4-channel 509
7-channel 506
9-channel 504
14-channel 499
Setting the DMX address
Operating
40
LED Ball RGBW 50cm 4x8W DMX
LED ball