User manual
Table Of Contents
- Table of contents
- 1 General information
- 2 Safety instructions
- 3 Features
- 4 Installation
- 5 Starting up
- 6 Connections and controls
- 7 Operating
- 7.1 Starting the device
- 7.2 System settings
- 7.3 Stand-alone mode
- 7.4 DMX operation
- 7.5 Menu overview
- 7.6 Functions in 2-channel DMX mode
- 7.7 Functions in 3-channel DMX mode
- 7.8 Functions in 4-channel DMX mode
- 7.9 Functions in 7-channel DMX mode
- 7.10 Functions in 9-channel DMX mode
- 7.11 Functions in 14-channel DMX mode
- 8 Technical specifications
- 9 Plug and connection assignments
- 10 Troubleshooting
- 11 Cleaning
- 12 Protecting the environment
Press [MENU] and then [UP] or [DOWN] until ‘Stand Alone’ is displayed and press [ENTER]. Press
[UP] or [DOWN] repeatedly, until the display shows ‘Auto’ and press [ENTER]. Use [UP] or
[DOWN] to select one of the two automatic shows (display shows ‘Program 1’ or ‘Program 2’ )
and select [ENTER]. To customize the speed and dimmer intensity of the selected show, use
[UP] or [DOWN] to select one of the following options:
Display Meaning
‘Dimmer’ Dimmer intensity
‘Speed’ Programme running speed
For the dimmer intensity, use [UP] or [DOWN] to select a value from ‘000’ to ‘255’ , or for the
programme speed a value from ‘000’ to ‘100’ and conrm it with [ENTER].
Press [MENU] and then [UP] or [DOWN] until ‘Stand Alone’ is displayed and press [ENTER]. Press
[UP] or [DOWN] repeatedly, until the display shows ‘Sound’ and press [ENTER]. Use [UP] or
[DOWN] to select either ‘000’ (microphone o) or a sensitivity in the range of ‘01’ (low) … ‘99’
(high).
Automatic show selection
Setting the microphone sensi‐
tivity for sound control
Operating
LED Ball RGBW 50cm 4x8W DMX
35
LED ball