User manual
Table Of Contents
- Table of contents
- 1 General information
- 2 Safety instructions
- 3 Features
- 4 Installation
- 5 Starting up
- 6 Connections and controls
- 7 Operating
- 7.1 Starting the device
- 7.2 System settings
- 7.3 Stand-alone mode
- 7.4 DMX operation
- 7.5 Menu overview
- 7.6 Functions in 2-channel DMX mode
- 7.7 Functions in 3-channel DMX mode
- 7.8 Functions in 4-channel DMX mode
- 7.9 Functions in 7-channel DMX mode
- 7.10 Functions in 9-channel DMX mode
- 7.11 Functions in 14-channel DMX mode
- 8 Technical specifications
- 9 Plug and connection assignments
- 10 Troubleshooting
- 11 Cleaning
- 12 Protecting the environment
Press [MENU] and then [UP] or [DOWN] until ‘System Info’ is displayed and press [ENTER]. Use
[UP] or [DOWN] to select one of the following options:
Display Meaning
‘ Firmware’ The current software version of the device will appear
on the display.
‘Temperature’ The display shows the current device temperature.
‘Operation Hours’ The display shows the total number of operating hours.
Conrm the desired selection with [ENTER].
7.3 Stand-alone mode
In stand-alone mode, you can make device settings directly by pressing a button.
System information
Operating
34
LED Ball RGBW 50cm 4x8W DMX
LED ball