User manual
Table Of Contents
- Table of contents
- 1 General information
- 2 Safety instructions
- 3 Features
- 4 Installation
- 5 Starting up
- 6 Connections and controls
- 7 Operating
- 7.1 Starting the device
- 7.2 System settings
- 7.3 Stand-alone mode
- 7.4 DMX operation
- 7.5 Menu overview
- 7.6 Functions in 2-channel DMX mode
- 7.7 Functions in 3-channel DMX mode
- 7.8 Functions in 4-channel DMX mode
- 7.9 Functions in 7-channel DMX mode
- 7.10 Functions in 9-channel DMX mode
- 7.11 Functions in 14-channel DMX mode
- 8 Technical specifications
- 9 Plug and connection assignments
- 10 Troubleshooting
- 11 Cleaning
- 12 Protecting the environment
Press [MENU] and then [UP] or [DOWN] until the menu item ‘Settings’ is displayed and press
[ENTER].
Press [UP] or [DOWN] until ‘DMX Fail’ is displayed and press [ENTER]. Use [UP] or [DOWN] to
select one of the following options:
Display Meaning
‘ Hold’ If the DMX control fails, the last setting is retained.
‘Blackout’ If the DMX control fails, the spot light is blacked out.
‘Emergency Light’ If the DMX control fails, an emergency Light kicks in.
Conrm the desired selection with [ENTER].
Behaviour on DMX control
failure
Operating
LED Ball RGBW 50cm 4x8W DMX
29
LED ball