user manual Firmware: V1.1

Use the ‘Calibration’ menu to adjust the start parameters of the device.

Press [ENTER] to activate the main menu and use [UP] or [DOWN] until the display shows

‘Settings’ . Conrm the value with [ENTER] and use [UP] or [DOWN] to select the submenu

‘Calibration’ .

Conrm the value with [ENTER]. The device prompts you to enter a password. Press [UP] or

[DOWN] repeatedly until the display shows ‘018’ and conrm the selection with [ENTER].

Use [UP] or [DOWN] to select the desired parameter to set.

Parameter Function

‘All To Origin’ Resets all parameters of the calibration to factory settings.

‘Pan’ Sets the home position of the rotation.

‘Tilt’ Sets the home position of the inclination movement.

‘Red ’ Sets the initial intensity for red.

‘Green’ Sets the initial intensity for green.

‘Blue’ Sets the initial intensity for blue.

‘White’ Sets the initial intensity for white.

‘Amber’ Sets the initial intensity for amber.

‘UV’ Sets the initial intensity for UV light.

Calibrating

Operating

Hero Wash 715 HEX LED Hero Wash 715 HEX LED WH

Moving Head